Electrolux CH 600 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Вентиляційна витяжка Electrolux CH 600. Electrolux CH 600 13 сторінок. Electrolux cooker hood
Також для Electrolux CH 600: Посібник користувача (12 сторінок), Посібник користувача (14 сторінок), Посібник користувача (12 сторінок)

Друкувати сторінку

Charcoal filter

• The charcoal filter should only be used if you

want to use the hood in the recirculation

function.

• To do this you will need an original

ELECTROLUX charcoal filter (available from

your local Service Force Centre).

• This filter cannot be cleaned or reused.

• As a general rule, the activated carbon

filter should be changed once every four

months.

• Mounting — Fig. 4

Fit one carbon filter on the left and one on the

right so to cover the plastic grids that protect the

fan wheel, then turn clockwise the central

handle of the carbon filter.

• To remove proceed in the reverse order.

• Always specify the hood model code number

and serial number when ordering replacement

filters. This information is shown on the

registration plate located on the inside of the

unit.

• The charcoal filter can be ordered from your

local ELECTROLUX Service Force Centre.

Changing the light bulb

• Disconnect the cooker hood from the main

supply.

• Remove the lamp cover.

• Replace the old bulb with a new one of the

same type.

• Remount the lamp cover.

• If the light does not come on, make sure the

bulb has been inserted in correctly before

contacting the technical assistance service.

Changing the light bulb -

only models EFC 9405 - 6405

• Disconnect the cooker hood from the main

supply.

• Remove the lamp cover, use a screw driver as a

lever. Fig. 5.

• Replace the old bulb with a new one of the

same type.

• Refit the lamp cover.

• If the light does not come on, make sure the

bulb has been inserted correctly before

contacting your local Service Force Centre.

Fig. 4

Fig. 5