Electrolux EFA 90673 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Вентиляційна витяжка Electrolux EFA 90673. Electrolux EFA 90673 27 сторінок. Electrolux cooker hood user manual

Друкувати сторінку

1. Maintenance and Care

electr

electrolux

olux

olux control panel

olux

ease and char

Grease and char

ease and char

ease and charcoal filter

maintenance indicator

This hood is fitted with a device that

indicates when it is necessary to clean

the grease filter or the charcoal filter (if

the hood is used in the recirculation

version with a charcoal filter).

On delivery, the hood is not supplied

with a charcoal filter, so the saturation

indicator will be disabled.

If the hood is to be used with a

charcoal filter, the saturation

indicator light must be enabled as

follows:

Set in "OFF

OFF" the hood.

OFF

Press buttons 3 3 3 3 3 and 4 4 4 4 4 simultaneously

and hold them for 3 seconds. At first

only the grease filter LED F F F F F will light up,

but when the charcoal filter LED C C C C C

lights up the saturation indicator will be

enabled.

To disable it: Press buttons 3 3 3 3 3 and 4 4 4 4 4

again simultaneously and hold

them for 3 seconds, until the charcoal

filter LED goes out.

coal filter

Grease filter LED (F)

LED F F F F F will start to flash when it is time

to clean the grease filter.

Cleaning will be necessary after 40

working hours. Always comply with the

maintenance instructions for the grease

filter.

Charcoal filter LED (C)

The charcoal filter LED C C C C C will start to

flash when the charcoal filter needs to

be replaced.

This operation is necessary after

approximately 160 working hours.

Resetting the saturation indicator

After cleaning or replacing the filters,

press button 3 3 3 3 3 for 3 seconds until the

grease filter LED F F F F F or the charcoal filter

LED C C C C C stops flashing.