Electrolux EFA90245X Посібник користувача - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник користувача для Вентиляційна витяжка Electrolux EFA90245X. Electrolux EFA90245X 21 сторінка. Electrolux cooker hood
Також для Electrolux EFA90245X: Посібник з монтажу (16 сторінок), Посібник з монтажу (16 сторінок)
Друкувати сторінку
Electrical Connection
• Connect the Hood to the Mains power supply, inserting
a two-pole Switch with a contact aperture of at least
3 mm.
• Remove the Metal grease filters (see par. on "Mainte-
nance") and make sure that the power supply Cable
is properly inserted in the Suction fan socket.
• Take the wires indicated in fig.1 and pass them through
the slot formed on the galvanized diffuser support,
as shown in fig.2.
• Position the finishing plug 27 over the housing in
the diffuser support, fixing it using a screw 12e (2.9
x 9.5) and applying the 2 cable clamp elements 26
as indicated in figs. 3 and 4.
• Connect the Controls Connector fig. 5.
• Store both the Connectors in the Protective box 24 and
close it with 2 Screws 12e (2.9 x 9.5), provided.
• Remove the protective film from the double-sided
adhesive on the connection box, and fix it inside the
motor compartment fig. 6.
17
2
4
6
1
3
5