Electrolux EFC 009.1X Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Вентиляційна витяжка Electrolux EFC 009.1X. Electrolux EFC 009.1X 14 сторінок. Electrolux cooker hood
Друкувати сторінку
• From the bottom of the telescopic supporting
structure fit the connection ring supplied
(bajonett attachment- turn clockwise and fix
definitively with one screw 2,9x9,5). (Fig.
10).
• Fit a section of pipe or flex tube Ø 150 mm
sufficiently long to reach the connection ring
of the hood once this hood will be fit on
place (Fig. 10).
For both versions:
• Fix the supporting structure to the ceiling
with 4 screws 5x45 and dowel (b - Fig. 8).
• Sides with fixing points "c" for the external
telescopic chimney correspond to the right
and left sides (fig. 8).
• The hood is supplied with installation fit-
tings suitable for most kinds of ceilings, but
in any case a qualified installation techni-
cian must be consulted in order to choose
the best mounting solution.
• Fix the upper and lower part of the utter
chimney together temporarily with one screw
"a" 2,9x6,5 (Fig. 11).
• Fix the upper part of the chimney to the
supporting structure with two screws "b"
2,9x6,5 (Fig. 11).
• Fit four auto locking nuts on the four pins
located on the upper side of the hood (Fig.
12).
Fig. 10
a
Fig. 11
Fig. 12
40
b