AirTech ATS-100 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Радіо AirTech ATS-100. AirTech ATS-100 8 сторінок. Land mobile radio

Друкувати сторінку

RF Exposure

Tests for SAR are conducted using standard operating

positions specified by the FCC with the phone

transmitting at its highest certified power level in all

tested

frequency

bands.

determined at the highest certified power level, the

actual SAR level of the phone while operation can be

well below the maximum value. This is because the

phone is designed to operate at multiple power levels

so as to use only the power required to reach the

network. In general, the closer you are to a wireless

base station antenna, the lower the power output.

Before a phone model is available for sale to the public,

it must be tested and certified to the FCC that it does

not exceed the limit established by the government-

adopted requirement for safe exposure, The tests are

performed in positions and location (e.g., at the ear and

worn on the body) as required by the FCC for each

model. (Body-worn measurements may differ among

phone models, depending upon available accessories

and

FCC

requirements).

differences between the SAR levels of various phones

and at various positions, they all meet the government

requirement for safe exposure.

For body worn operation, to maintain compliance with

FCC RF exposure guidelines, use only accessories that

contain no metallic components and provide a

separation distance of 15mm (0.6 inches) to the body.

Use of other accessories may violate FCC RF exposure

guidelines and should be avoided.

Although

the

SAR

While

there

may

It is designed and manufactured not to exceed the

emission limits for exposure to radio frequency (RF)

energy

set

the

Commission of the U.S. Government. These limits are

part

comprehensive

permitted levels of RF energy for the general population.

The guidelines are based on the safety standards

previously set by both U.S. and international standards

bodies:

This EUT has been shown to be capable of compliance

for localized specific absorption rate (SAR) for

uncontrolled environment/general population exposure

limits specified in ANSI/IEE Std. C95.1-1992 and had

been tested in accordance with the measurement

procedures

specified

Supplement C (2001) and IEE Std. 1528-200X (Draft6.5,

January 2002).

Ministry of Health (Canada), Safety Code 6. The

standards include a substantial safety margin designed

to assure the safety of all persons, regardless of age

and health. The exposure standard for wireless mobile

phones employs a unit of measurement know as the

Specific Absorption Rate, or SAR. The SAR limit set by

the FCC is 1.6W/kg*.

Federal

Communications

guidelines

and

establish

FCC/OET

Bulletin