Atlantic PV1700 Посібник з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Газонна та садова техніка Atlantic PV1700. Atlantic PV1700 12 сторінок. Oasis series skimmer, filterfalls, pump vault, fastfalls
Також для Atlantic PV1700: Інструкція з експлуатації (16 сторінок)

For Larger Basin Volumes

For installations where a larger basin volume or a deeper basin is required, Atlantic offers
Pump Vault Extensions for both the PV1800 and PV2300. Each additional layer of Eco-Blox
increases the depth of your excavation by 17.5"; use one Extension for each additional layer.
Plumbing the PV1800/PV2300
Atlantic's Pro Series Pump Vaults do not
come pre-drilled for the pump outlet.
Not having a pre-drilled pump outlet
gives the professional installer the
flexibility to choose which side of the
enclosure to exit and with what size
pipe. Drill points and cut lines have
been provided for 2" and 3" flex PVC.
Two panels at the top have been left
flat for custom plumbing applications
as well as the installation of an AF1000
Auto Fill and/or overflow. Recessed
areas and cut lines for 4" and 6" SDR35
have been provided on two bottom
panels. Pipe extensions can be added
to increase the flow of water into the
vault and also increase the ability to
channel debris into the vault.
SP1600/SP1900/SP2600/SP3800 FastFalls Installation

Setting the Fastfalls

Place the FastFalls on a level bed of undisturbed soil if possible, to avoid settling. If
installing above existing grade, compact the area thoroughly. This critical step will ensure
that the FastFalls will not settle out of level over time. Blocks or bricks set on virgin soil can
also be used to raise the FastFalls while reducing the chance of settling.
Place the FastFalls right at the basin's edge to create a single dramatic fall, or pull the
FastFalls back from the edge to create a stream. Leave plenty of liner around the
FastFalls to make it easy to camouflage with rock later.
To ensure a leak-proof installation, test place the FastFalls in the desired location and level it
from side-to-side and front-to-back. The closed design of the FastFalls ensures that
water will only exit the unit over the spillway, so there is no need to tilt the FastFalls forward.
Once excavation is complete, install
underlayment, pond liner, properly oriented
Eco-Blox and Pump Vault. Backfill the space
between the Eco-Blox/ Pump Vault and the
excavation to lock them into place, either
outside the liner with sand or clean fill, or
inside the liner with gravel ¾" or larger in
diameter. Top the liner and basin with ¾"
or larger gravel or decorative stone.
2" & 3"
cutlines
FLAT PANELS
FOR AUTO FILL
INSTALLATION &
CUSTOM PLUMBING
4" & 6"
SDR35
7