Atlantic TidalWave A-31 Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Водяний насос Atlantic TidalWave A-31. Atlantic TidalWave A-31 8 сторінок. Tidalwave a series pumps
Також для Atlantic TidalWave A-31: Посібник з експлуатації (16 сторінок)
• In case of very excessive vibration, unusual noise or odor, turn off the
power immediately and consult with your nearest dealer. Continuing to
operate the pump under abnormal conditions may result in electrical
leakage, electrical shock or fire.
Motor Protection System
• The pump has a built-in motor protection system. The following reasons
may cause the pump to stop automatically regardless of water level.
Motor overheating
Excessive current
Change in voltage polarity
Open-phase operation or operation under constraint
• Repeating cycles of stopping and restarting will damage the water
pump. Do not continue operation at low lift, low water level, or while
the inlet is clogged with debris. Not only will performance suffer, but
also such conditions may cause noise, heavy vibration, and pump failure.
Maintenance and Inspection
• Regular maintenance and inspections are a necessity for continued
efficient functioning. If any abnormal conditions are noticed, refer to the
section on Troubleshooting and take corrective measures immediately.
• During or after the warranty period, the customer is NOT to
disassemble the pump for any reason.
Monthly Inspection
• Check for any drop in performance. Reduced performance is usually
caused by debris blocking the intake screen.
• Detach the power cable from the receptacle and turn off the power
supply (circuit breaker).
• Disconnect the pump discharge and remove the pump from the water.
• Remove any accumulated debris from the surface of the pump, inlet
screen and impeller.
• Make sure all nuts and bolts are fastened securely.
• Do not disassemble the pump for any reason. Disassembly will void
the pump warranty. Refer operating and maintenance problems to a
qualified technician.
5