Drew Technologies opus IMclean DAD4 Посібник - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник для Діагностичне обладнання Drew Technologies opus IMclean DAD4. Drew Technologies opus IMclean DAD4 16 сторінок.

Друкувати сторінку
8.
If the DAD does not pass the test, leave this screen up when you
contact Technical Support as it will help them diagnose the issue
you are having.
a. Pass Example:
IMCLEAN DAD ERROR CODE STRING INFORMATION:
Code 0: Passed the test
Code 7 or 8:
• No devices detected. Please connect
one and retry.
o
Need to plug in IMClean USB cable;
repair Bluetooth.
• Firmware Error e7: efailed 'OpenDevice:
Cable not connected'
o
Need to plug in the proprietary
IMClean OBD2 cable
• [0201] No +12V test voltage available:
Expected > 8000mV, found #v
o
Need to plug in external power, using the
the IMClean External Charger or IMClean
Cigarette Lighter Cable
• [0202] Pin 16 voltage test FAILED:
expected > 11040mV, found ##LESS##
o
Need to plug in IMClean Self-Test Cable
• [0301] Pin 4 ground test FAILED:
expected 2650mV OC voltage,
found #m
o
Generally this indicates hardware damage.
o
Sometimes swapping 12v sources can
resolve this.
b. Fail Example:
• [0302] Pin 5 ground test FAILED:
expected 2650mV OC voltage,
found #m
o
Generally this indicates
hardware damage.
o
Sometimes swapping 12v
sources can resolve this.
• [0905] J1850PWM Remote Static Test:
Remote shows deasserted while local
TX asserted
o
Generally this indicates
hardware damage.
• [1002] K-Line Static Test: Idle state
voltage too low:
Expected > 10370mV, Found 160mV
o
Generally this indicates
hardware damage.
11