Aleratec 260167 Посібник із швидкого старту - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Дисковий дублікатор Aleratec 260167. Aleratec 260167 17 сторінок. 1:2 dvd/cd copy cruiser pro hlx win/mac
Друкувати сторінку
Summary of Operation
Your Aleratec 1:2 DVD/CD Copy Cruiser Pro Win/Mac is equipped with a USB 2.0 port
that is a bridge to both LightScribe DVDRW drives.
Stand Alone Duplicator
1.
Power-on your 1:2 DVD/CD Copy Cruiser Pro Win/Mac (do not attach the USB
Cable) and select the Copy function by pressing the arrow buttons. Place the
source disc in the top DVD/CD Recorder. Place a blank disc in the lower DVD/
CD Recorder. After the unit detects the blank disc, press the ENT button to start
copying.
2.
When copying is completed, a good disc copy will be ejected automatically. A
failed disc will remain in the DVD/CD Recorder and can be ejected manually.
3.
Detailed instructions are included in the 1:2 DVD/CD Copy Cruiser Pro Win/Mac
User Guide included on the Installation CD.
Software Installation
For Mac Users
Mac users please see the Discribe Multiburner Software Quick Start Guide.
For Windows Users
For Windows users, place the Aleratec Disc Publishing Software Suite CD into the DVD/
CD drive in your PC. Install the Acoustica and Roxio software.
Getting Started
Disc Publishing
1.
Connect the USB cable (included) to the USB port on the back of your duplicator
and to an empty USB port on your computer.
2.
Power on your 1:2 DVD/CD Copy Cruiser Pro Win/Mac. The display should show:
USB
L.H. Mode
D1 Mult D2 Mult
If you do not see this display, refer to the USB section of the User Guide.
2
www.aleratec.com