Atlantic Technology IW-115SR Інструкція з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Спікери Atlantic Technology IW-115SR. Atlantic Technology IW-115SR 12 сторінок. In-wall high performance surround speaker
Друкувати сторінку
Instruction Manual
Speaker Installation
NOTE: We always recommend a professional be involved in the installation of the
IW-115SR.
Installation of the IW-115SR in New Construction with Optional
New Construction Bracket
Installation of the IW-115SR in Existing Construction
hole at least 1½ inches (38mm) away from beams or obstructions to ensure that the clamps
have adequate room to rotate. A crossbrace or other obstruction that' s too close will stop
them from properly doing their job.
DIPOLE
BIPOLE
For new construction, we highly recommend that
you use the optional IN-NC-155 New Construc-
tion Bracket.
The lip on the New Construction Bracket must
face outwards into the room. Wallboard is then
installed up to the lip, leaving a perfectly-defined
mounting hole for the speakers. Use a level to get
it straight; this can't be fixed later.
The IW-115SR can be easily mounted in most
any standard wall material, from ½ to 1½ inches
(12 to 38mm) thick. The IW-115SR rotating wall
clamps firmly fix it to the wall surface after the
proper cutout has been made.
An important precaution to take before
mounting:
Keep the top and bottom of the actual mounting
Speaker Installation
7