Atlantic Technology 10 CSB Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Сабвуфер Atlantic Technology 10 CSB. Atlantic Technology 10 CSB 12 сторінок. Corner subwoofer
Також для Atlantic Technology 10 CSB: Інформаційний листок продукту (2 сторінок)
Друкувати сторінку
STATUS
LEVEL
8
Connections
MIN
MAX
Example 6: Speaker Out/High Level In for 1 Subwoofer
FREQ
This is the most common method for connecting a subwoofer to a system without a dedicated subwoofer line
out or preamp outputs.The signal that comes from the High-Level Output jacks is hi-pass filtered to prevent
50
160
overdriving the satellites with deep bass frequencies.
PHASE
0
180
-
+
RIGHT
Right
Speaker
STATUS
LEVEL
MIN
MAX
CAUTION
RISK OF ELECTRIC SHOCK
FREQ
NORMAL
WARNING: SHOCK HAZARD-DO NOT OPEN
50
160
AVIS:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
WARNING
PHASE
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLICANCE TO RAIN OR MOISTURE. NO USER SERVICEABLE
0
180
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
-
+
RIGHT
Right Subwoofer
220-240V
Right
Speaker
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: SHOCK HAZARD-DO NOT OPEN
AVIS:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
OFF
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLICANCE TO RAIN OR MOISTURE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
L/MONO
LOW
LEVEL
RIGHT
NORMAL
BYPASS
LOWPASS
OFF
AUTO
ON
STDBY
INPUT
HIGH
LEVEL
OUTPUT
-
+
L/MONO
Subwoofer
Left
Speaker
L/MONO
LOW
LEVEL
RIGHT
DO NOT OPEN
BYPASS
LOWPASS
OFF
AUTO
ON
STDBY
INPUT
HIGH
LEVEL
OUTPUT
-
+
L/MONO
110-120V
220-240V
Left
Speaker
POWER
ON
OFF
110 - 1 20 VA C~6 0 Hz
FUSE 115,T2AL/250V
2 2 0 -2 4 0 VAC ~50 H z
FUST 230V,T1.25AL/250V
18 0 WAT T S
Receiver/Processor
STATUS
LEVEL
MIN
MAX
Example 7: Speaker Out/High Level In for Stereo Subwoofers
This is the most common method for connecting 2 subwoofers to a system without a dedi-
FREQ
cated subwoofer line out or Preamp outputs. Note that the L/MONO High Level input is
NORMAL
used on both left and right subwoofers.
50
160
OFF
AUTO
PHASE
0
180
-
-
+
RIGHT
L/MONO
Left Subwoofer
You can connect to the High-level inputs by removing 1/2" of insulation from each wire end,
CAUTION
twisting the strands of wire together and placing the wire into the appropriate terminal's
RISK OF ELECTRIC SHOCK
DO NOT OPEN
hole on the rear of the subwoofer while pushing the adjacent latch as illustrated.Be careful
WARNING: SHOCK HAZARD-DO NOT OPEN
that no stray strands of wire touch across connections.
AVIS:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
WARNING
It is important to observe polarity while making speaker connections: red (+) terminals
on the amplifier to red (+) on the speaker, black (–) on the amplifier to black (–) on the
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLICANCE TO RAIN OR MOISTURE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
speaker. Look carefully at the wires you are using and note that one of the wires in each
pair will be marked by either the conductor color, printing on the wire jacket, a ridge on
one side of the wire jacket, or a thread intertwined with the wire strands. By convention,
the marked wire is connected to the red (+) terminal.
�
L/MONO
LOW
LEVEL
RIGHT
BYPASS
LOWPASS
ON
STDBY
INPUT
HIGH
LEVEL
OUTPUT
+
Receiver/Processor
10 CSB Corner Subwoofer
�
�
�