Electrolux ICON E36WV100FS Посібник з експлуатації та догляду Інструкція з монтажу - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з експлуатації та догляду Інструкція з монтажу для Вентиляційна витяжка Electrolux ICON E36WV100FS. Electrolux ICON E36WV100FS 24 сторінки. Electrolux ventilation hood installation instructions and use & care guide
Друкувати сторінку
8
Getting Started
OPERATING YOUR HOOD
The hood is operated using the slide controls under the front edge of the hood.
The light switch turns the halogen lights on and off.
BLOWER
BLOWER
LIGHT
ON/OFF
SPEED
SWITCH
SWITCH
CONTROL
WARNING
The HEAT SENTRY thermostat can start the blower even if the hood is turned OFF. When
this occurs, it is impossible to turn the blower OFF with its switch. If you must stop the
blower, do it from the main electrical panel.
The blower on/off switch turns the blower on to the running
speed set by the blower speed control. The blower must be
turned on and off using this switch.
The blower speed control changes the running speed of the
blower (1-2-3).
The pilot lamp lights up whenever the blower is on.
PILOT
HEAT SENTRY™
LAMP
Your hood is equipped with a HEAT SENTRY™ thermostat.
This thermostat is a device that will turn on or speed up
the blower if it senses excessive heat above the cooking
Figure 1
surface.
1 If blower is OFF - it turns blower ON to HIGH speed.
2 If blower is ON at a lower speed setting - it turns blower
up to HIGH speed.
When the temperature level drops to normal, the blower will
return to its original setting.