Atlantic Technology IWTS-28 SUB Інструкція з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Сабвуфер Atlantic Technology IWTS-28 SUB. Atlantic Technology IWTS-28 SUB 8 сторінок. High performance in-wall subwoofer
Друкувати сторінку
Instruction Manual
Installing the Speaker Assembly into the Frame
Once the frame is mounted in the wall, the speaker assembly simply fits
into the frame as shown.
Use the included screws to attach the enclosure to the mounting frame.
Front Panel Controls
Low-Pass Control
The IWTS-28 SUB has a front-mounted control that
selects or bypasses the speaker's built-in low-pass
corossover. Leave this in the off position when using the
28 SUB with an outboard amplifier and your receiver's
low-pass crossover.
IR Knockout
There's an IR "knockout" plug in the upper right corner
of the baffle. If you are using a multi-room control sys-
tem, you can install a standard IR receiver in the knock-
out hole.
Should you have any questions or problems please feel free to contact us at
781-762-6300 or through our web site, www.atlantictechnology.com.
Specifications
overall Dimensions (W x H x D)
Cut-out Dimensions (W x H)
Drivers/Design
Frequency Response
Recommended Amplifier Power
Low-pass Filter Frequency
Sensitivity
Impedance
Required Grille/frame assembly
Specifications are those in effect at the time of printing. Atlantic Technology reserves the right
to change specifications or appearance at any time without notice.
Specifications
IWTS-28 SUB
12
5
⁄
x 21
5
⁄
x 3
7
⁄
" (312 x 547 x 100mm)
16
8
8
11
⁄
x 20
⁄
" (283 x 518mm)
1
3
8
8
Dual 8" (203mm) long-throw, 40mm voice coils
38-200 Hz +/- 3dB, passive response
30-200 Watts RMS
200 Hz
89dB
Each individual woofer 8 ohm; paralleled 4 ohms
GFR-626
7