Care and cleaning
The e ciency of the range hood system depends on
the cleanliness of the intake and lters.
The frequency of cleaning depends on the amount
and type of cooking.
Do not use the ventilating system without the
lters in place or with grease-laden lters or
surfaces.
To avoid risk of re and explosion do not use
ammable liquids or solvents.
Always unplug or disconnect the appliance from the
power supply before servicing.
Be sure the entire hood (including the lters and light
bulbs) has cooled and grease has solidi ed before
attempting to clean any part of the appliance.
Filters
Filters
Filters
Filters
Filters
The metal grease lters are made of stainless steel
anodized aluminum and are long lasting.
T T T T T o Remove The Metal Gr
o Remove The Metal Gr
o Remove The Metal Gr
o Remove The Metal Gr
o Remove The Metal Gr
ease Filters
Turn the fan and lights o .
Pull the spring release handle.
T T T T T o Replace The Metal Gr
o Replace The Metal Gr
o Replace The Metal Gr
o Replace The Metal Gr
ease Filters
ease Filters
ease Filters
o Replace The Metal Gr
ease Filters
ease Filters
Reverse procedure.
T T T T T o Clean Filters
o Clean Filters
o Clean Filters
o Clean Filters
o Clean Filters
It is recommended that the lters be washed at
least once a month; they can be washed by hand
or in the dishwasher.
Drain water through edge holes and let each lter
dry thoroughly before replacing it.
Care and cleaning
Lights
Lights
Lights
Lights
Lights
Before replacing the lamps, switch power o at
service panel and lock service panel disconnecting
means to prevent power from being switched on
accidentally.
NOTE: Tur ur ur ur urn of
NOTE: T
NOTE: T
NOTE: T
NOTE: T
n off the lights and fan. Allow the lights
n of
n of
n of
f the lights and fan. Allow the lights
f the lights and fan. Allow the lights
f the lights and fan. Allow the lights
f the lights and fan. Allow the lights
to to to to to cool
cool
cool
cool
cool befor
befor
befor
before handling.
befor
e handling.
e handling.
e handling. If new lights do not
e handling.
If new lights do not
If new lights do not
If new lights do not
If new lights do not
operate be sur
operate be sur
e lights ar
e lights ar
e inserted corr
e inserted corr
operate be sur
operate be sur e lights ar
operate be sur
e lights ar
e lights ar e inserted corr
e inserted corr
e inserted corr ectly befor
calling service.
calling service.
calling service.
calling service.
calling service.
Replace Lights
Replace Lights
Replace Lights
Replace Lights
Replace Lights
Remove the inner lamp lens cover by inserting a
small at blade screwdriver into each of the three
slots and gently prying it free.
NOTE: Do not remove the outer trim ring (lamp
assembly).
Grasp the bulb and pull it straight out.
Replace with 12 volt, 20 watt halogen bulbs with
a G4 base SUITABLE FOR USE IN OPEN
LUMINAIRES.
Follow package directions, wear gloves, do not
Follow package dir
Follow package dir
ections, wear gloves, do not
ections, wear gloves, do not
ections, wear gloves, do not
Follow package dir
Follow package dir
ections, wear gloves, do not
touch bulb with your bar
touch bulb with your bar
touch bulb with your bar
touch bulb with your bar
touch bulb with your bar e ngers.
Replace inner cover by inserting the three
retaining tabs into the three slots and pressing
them rmly in place.
ectly before e e e e
ectly befor
ectly befor
ectly befor
e ngers.
e ngers.
e ngers.
e ngers.
19 19
19 19
19
Друкувати сторінку