ADVANCED Network Devices AND-BTN-KIT-1 Встановлення - Сторінка 2

Переглянути онлайн або завантажити pdf Встановлення для Годинник ADVANCED Network Devices AND-BTN-KIT-1. ADVANCED Network Devices AND-BTN-KIT-1 4 сторінки.

Друкувати сторінку

NON-REGISTERED OPERATION

If the AND device is not registered

with any servers, you can use the

following general purpose URL

callback to generate actions based

on an input change, such as a push

button press.

1. Power up the AND device with

the monitored input.

2. Configure a GPIO Callback URL for

the device. This example uses the

URL

http://10.10.3.4:8089/directory/

file, where 10.10.3.4:8089 is the

IP address and port of the server

that will receive the response.

Note that directory and file are

optional parameters.

• If configuring the device using

the device's web page, select

Device Settings → Servers to

locate the GPIO Callback URL.

Set

the

http://10.10.3.4:8089/director

y/file, and save the settings.

• If using a configuration file, add

the following tag:

<GPIO_callback

url="http://10.10.3.4:8089/directo

ry/file"

min_update_period_ms="250"

3. Reboot the device.

Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004

[email protected]

Call Button Kit Installation

URL

• 847-463-2237 •

In this example, when the input

changes state, the device will

execute

10.10.3.4, port 8089, of the

following format (parameters

detailed below):

GET

/directory/file?address=2046f9

010203&gpinputid=0&state=1&tra

nsitions=340

Parameter

Description

address

The MAC address of the

device with the input state

change

gpinputid

the input number that

changed

state

state of that input (0 or 1)

transitions

the total number of

transitions for that input

since last reboot

IPCLOCKWISE GPIO CALLBACK

1. Obtain the IP address of the PC

running

Windows, run ipconfig from a

command prompt to list the

address.

2. Power up the AND device with

the monitored input.

3. Set the GPIO Callback URL to

http://10.10.3.4:8089

10.10.3.4 is the IP address of the

PC running IPClockWise. See

section 2 of Non-Registered

Operation

options.

www.anetd.com/user-support/

(AND-BTN-KIT-1)

HTTP

GET

IPClockWise.

where

for

configuration

v1.5