Bosch 8 Series Посібник користувача та інструкція з монтажу - Сторінка 6

Друкувати сторінку

Bosch 8 Series Посібник користувача та інструкція з монтажу

en Familiarising yourself with your appliance

Use dark-coloured, black-coated or enamelled baking

tins.

¡ These types of baking tin absorb the heat particu-

larly well.

Open the appliance door as little as possible during

operation.

¡ This maintains the temperature in the cooking com-

partment and eliminates the need for the appliance

to reheat.

When baking multiple dishes, do so in succession or

in parallel.

¡ The cooking compartment is heated after baking

the first dish. This reduces the baking time for the

second cake.

4 Familiarising yourself with your appliance

4.1 Control panel

You can use the control panel to configure all functions

of your appliance and to obtain information about the

operating status.

Note: On certain models, specific details such as col-

our and shape may differ from those pictured.

4.2 Buttons

Use the buttons on the left- and right-hand side of the control panel to switch your device or the operating mode on

and off.

Button

Function

On/Off

Start/Stop

4.3 Touch fields

Use the touch fields to select different functions directly.

The touch field for the function that is currently selected lights up red.

Use

Switch the appliance on or off.

Short press: Start or pause operation.

Press and hold for approx. three seconds: Cancel operation.

If the cooking time is relatively long, you can switch

the appliance off 10 minutes before the cooking time

ends.

¡ There will be enough residual heat to finish cooking

the dish.

Remove any accessories that are not being used from

the cooking compartment.

¡ Accessories that are not being used do not need to

be heated.

Allow frozen food to defrost before cooking.

¡ This saves the energy that would otherwise be re-

quired to defrost it.

Note:

The appliance requires:

¡ A maximum of 1 W in standby mode with the dis-

play switched on

¡ A maximum of 0.5 W in standby mode with the dis-

play switched off

Buttons

The buttons on the left- and right-hand side of

the control panel have a pressure point. Press-

ing a button will execute its function. On appli-

ances without a stainless steel front, the but-

tons are also touch-sensitive.

Touch fields

Touch fields are touch-sensitive surfaces. To

select a function, simply press lightly on the rel-

evant field.

Touch displays

You can see the current selection options in the

touch displays. To select a function, press on

the corresponding field. The text fields change

depending on the selection.

Control ring

The control ring can be turned infinitely in either

direction. Press down lightly on the control ring

and move it in the direction you require.

Display

The display shows the current setting values or

notification texts.