Electrolux # Інструкція з експлуатації - Сторінка 4

Друкувати сторінку

1. Description of the Appliance

Before use

Position and clean the cabinet as explained in the

section "Installation".

Check that the drain hose at the rear of the cabinet

discharges into the drip tray.

Before inserting the power plug into the

outlet and switching on the cabinet for

the first time, leave it standing upright

for about 4 hours. Otherwise the

compressor may sustain damage. This

time will allow the oil sufficient time to

return to the compressor.

Using the fridge

To start the fridge and set the

correct temperature

Turn the thermostat control to the desired position.

MIN The lowest position of the thermostat control

results in the highest temperature inside the cabinet.

MAX The highest position of the thermostat control

results in the lowest temperature inside the cabinet.

H :

Switched off.

Allow the cabinet to run for a period of 24 hours

whenever the temperature setting is changed. This

will allow the temperature to stabilise inside the

cabinet.

Temperature inside the fridge

A suitable temperature inside the fridge is approx.

+5°C. If the thermostat control is set to a too cold

temperature, food with a high water content may

start to freeze if it has been placed in the coldest

places in the fridge. The picture shows the coldest

and warmest places inside the fridge.

(+ warm, - cold)

Meat, fish and milk should be put in the coldest part

of the cabinet.

The temperature will be affecteed by:

· How often the door is opened

· How much food is stored

· Position of the appliance (See chapter

Installation)

Measuring the temperature

If the temperature is measured using a standard,

single thermometer, this should be put in a glass of

water centrally placed inside the cabinet. This will

reflect the temperature inside the food products. Do

not place the thermometer hanging or lying directly

on the shelf.

Electrolux 818 19 39--00/3