Electrolux 2100 Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пилосос Electrolux 2100. Electrolux 2100 13 сторінок.

Wand and Hose Assembly

To attach power nozzle, slide end of wand into elbow on nozzle (Fig. E). Plug cord on power nozzle into connector in

sheath (Fig. F). To disassemble unplug cord, press release button and pull wand out.

CAUTION: Turn appliance off before connecting or disconnecting power nozzle.

Fig. E

For normal running only the Green Power Symbol Is Illuminated.

See below.

Power - When not

illuminated, check

power source.

Overheating Protection

The motor of this cleaner shuts off when the cleaner temperature rises above proper operating temperature. This

prevents damage from overheating, and prolongs cleaning power.

•

If the cleaner shuts off, turn cleaner OFF and disconnect power cord.

•

Check the wand, hose and power nozzle for blockage.

•

With the power cord disconnected from outlet, allow the machine to cool for approximately 30 minutes before

using again.

•

After cleaner returns to proper temperature, plug cord in, turn cleaner on, and resume cleaning.

Fig. F

Bag Check - Should you

attempt to operate cleaner

without a filter bag, the unit

will not start, and the bag

check symbol will appear.

Simply open the front cover

and insert a new filter bag; the

unit will then start.

Bag Change - Symbol will

illuminate and cleaner will

shut off. Replace filter bag,

reset ON/OFF switch.