Bosch AdvancedVac 20 Посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник для Пилосос Bosch AdvancedVac 20. Bosch AdvancedVac 20 6 сторінок.

Друкувати сторінку

OBJ_BUCH-3012-003.book Page 18 Wednesday, September 6, 2017 3:04 PM

18 | English

Cleaning/replacing filters (see figures F1–F4)

Replace any damaged filters immediately.

– Unlock the latches 8 and remove the vacuum lid 7.

– Remove the fabric filter 32 from the filter 33 and beat it

throroughly.

– Turn the filter holder 34 all the way in direction of rotation

" and take the filter 33 out of the container 1.

– Brush down the flaps of the filter with a soft brush.

Replace a damaged filter.

– Put the filter 33 over the filter basket 35 and turn the filter

holder 34 all the way in direction of rotation "

Ensure that the opening of the filter 33 sits exactly on the

positioning cam on the filter basket 35. The filter holder 34

clicks into place.

– Put the fabric filter 32 over the filter 33.

Please ensure that the fabric filter 32 encloses the filter 33

completely and that the rubber insert sits in the groove be-

tween the filter and the housing.

– Reattach the vacuum lid 7 again and lock the latches 8.

Container

– Wipe out the container 1 from time to time with a commer-

cially available, non-scouring cleaning agent and allow to

dry.

Cleaning the permanent filter (see figure G)

Clean the permanent filter 36 from time to time in order to en-

sure that the vacuum cleaner continues to perform optimally.

– Open the exhaust air cover 26 and remove the permanent

filter 36.

– Rinse out the permanent filter 36 under running water and

then leave it to dry thoroughly.

– Re-insert the cleaned filter, ensuring that it is seated cor-

rectly and securely. Close the exhaust air cover again.

Malfunctions

In the case of insufficient vacuuming performance, check the

following:

– Is the vacuum lid 7 attached properly?

– Is the hose system clogged?

– Are the suction tubes 20 securely fixed together?

– Is the container 1 full?

– Is the dust bag 29 full?

– Are the filters clogged with dust?

The vacuum cleaner switches off on overheating. Proceed as

follows:

– Leave the vacuum cleaner to cool down for 60 min.

– Briefly remove the mains plug from the socket and then re-

insert it.

– Make sure that the container 1 and dust bag 29 are empty

and that the vacuum hose 16, filter 33 and permanent fil-

ter 36 are not blocked.

Emptying at regular intervals ensures optimum vacuuming

performance.

If the vacuuming performance is not achieved thereafter, take

the vacuum cleaner to customer service.

1 609 92A 43W | (6.9.17)

Storage (see figure H)

– Insert the vacuum tubes 20 into the holders 14.

– Put the vacuum hose 16 around the vacuum lid in the hold-

ers 11, place the end of the vacuum hose on one of the two

holders 11.

– Wind the mains cable around the cable holder 37.

– Fasten the retaining straps 38 to the cable storage 37.

– Insert the curved nozzle 18 or the extraction adapter 17 in-

to the holder 15.

– Insert the crevice nozzle 19 into the holder 12.

– Insert the floor nozzle 21 into the holder 13.

– Carry the vacuum cleaner only by the carrying handle 6.

– Store the vacuum cleaner in a dry room and secure it

against unauthorised use.

– To lock the castors 9, actuate the castor brakes 10 by

pushing down.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Bosch's application service team will gladly answer questions

concerning our products and their accessories.

In all correspondence and spare parts orders, please always

include the 10-digit article number given on the nameplate of

the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

E-Mail: [email protected]

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: (01) 4666700

Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: (01300) 307044

Fax: (01300) 307045

Bosch Power Tools