Electrolux EFR31221 Посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник для Пилосос Electrolux EFR31221. Electrolux EFR31221 14 сторінок.

How to use the robot vacuum cleaner

Installation of the robot vacuum cleaner

1. Place the Charging base on the floor against the

wall. Plug the adaptor to the power jack on the

bottom of the base. Connect the Power cord plug to

the main socket. Wind up excessive cord on the back

of the base. Make sure there is an empty area of 0.5

m on the sides and 1.5 m in front of the Charging

base.

Note: Place the base in range of the WiFi router.

2. Attach the side brushes.

Note: If the robot is used to clean rooms with wall-to-

wall carpet, remove the side brushes for best cleaning

results.

3. Place the robot on the charging base.

The buttons will flash to indicate that the

robot is recharging.

Preparing the mopping function

1. Attach the mopping cover.

Attach the mopping pad with the cover and place

the mopping cover on the bottom of the robot.

Note: Only be done when mopping is to be

performed- i.e. not when vacuuming carpets.

www.electrolux.com

0.5m

1.5m