Bose FreeSpace DS 100SE Посібник з монтажу - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з монтажу для Спікери Bose FreeSpace DS 100SE. Bose FreeSpace DS 100SE 17 сторінок. With ceiling mount bracket
Також для Bose FreeSpace DS 100SE: Посібник користувача (32 сторінок), Технічний паспорт (8 сторінок), Посібник з монтажу (22 сторінок), Посібник з проектування (4 сторінок), Посібник з експлуатації (21 сторінок)

Bose FreeSpace DS 100SE Посібник з монтажу
Installation

Safety and Regulatory Compliance

The DS 100SE has passed extensive testing and complies with the following specifications and uses:
LISTED to ANSI/UL 1480-2005
• Fire Protective Signaling Use – UL Category UUMW, File Number S 3241.
Control Number 42S9 when installed with a junction box (on-wall or in-wall).
Not for use with DC-supervised systems.
• General Purpose Use – UL Category UEAY, File Number S 5591 Control Number 3N89.
• Suitable for use outdoors in wet locations.
• Suitable for installation using Class 1, Class 2, or Class 3 wiring methods in accordance with NFPA 70, National Electric
Code, 2002, Article 640.
• Suitable for use with fire alarm circuit wiring methods in accordance with NFPA 70, National Electric Code, 2002,
Article 760.
• EMC Directive 89/336/EEC and Article 10 (1) of the directive, EN50081-1 and EN50082-1 as signified by the CE mark.
The DS 100SE also has been designed to the requirements defined in the following European regulatory specification for
combination systems:
• British Standard Code of Practice BS 5839, Part 8.
• Tested to IEC60268-5.
UL Sensitivity Wattage Tap Sound Pressure Level dBA at 3.1 meters (10 feet):
Wattage
ANSI/UL 1480-2005
Tap
70V
12.5 Watt
84 dBA
25 Watt
86 dBA
50 Watt
88 dBA
100 Watt
91 dBA
8 Ohm
89 dBA
SPLs given are per the UL 1480 specified reporting method.
Frequency response:
Fire alarm: 400 Hz to 4 kHz
General signaling: 80 Hz to 16 kHz (±3dB)
The Declaration of Conformity for this product
can be found at
www.bose.com/static/compliance/index.html.

Wire gauge

®
The FreeSpace
DS 100SE loudspeaker bracket is designed to work with 18 AWG (0.8 mm
wire only.
12
100V
86 dBA
88 dBA
91 dBA
2
2
) to 14 AWG (2.0 mm
) size