Atlas Copco PHE 26 RA Інструкція з ремонту - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з ремонту для Дриль. Atlas Copco PHE 26 RA. Atlas Copco PHE 26 RA 12 сторінок.

Друкувати сторінку

Assembly

Note

Please additionally secure all screwed connections in metal with screw locking device.

Mounting the

1 Insert the rubber shell (4).

field

2 Insert the centering rails (2) in the

field (3).

3 Insert the field (3) in the motor housing (5)

by hitting it lightly on the rear.

4 Insert the air deflector plate (1).

Mounting the

1 Insert the sealing washer (3) into the

armature

housing liner.

2 Fit the O-Ring (4) to the liner on the

armature shaft.

3 Insert the armature into the extraction

housing (2).

4 Twist the armature until the reliefs in the

fan (5) for the end shield screws (6) are

released. Fasten the armature with

screws (4 Nm).

5 Fit the driving tenon (1) to the armature

pinion.

Assembling the

1 Press in the sealing washer (1). Grease

end shield

the sealing lip of the washer.

2 Lightly grease the sealing sleeve (2) and

press it into the sealing washer.

3 Insert the bearing (3).

4 Fit and secure the end shield cover (4).

Assembling the

1 Insert the thin felt washer (3), then the

front part of the

thick felt washer (3). Soak the felt washers

extraction

in oil.

housing

2 Fasten the retaining disk (4) with screws.

3 Fasten the end shield (1) to the extraction

housing (2).

4 Press in the turbine wheel (5).

steady the sealing sleeve (illustration 3,

step 2) with the pinion shaft.

When pressing in the turbine wheel (5),

Repair Instruction No. 174.3/95

PHE 26 RA

4 5

3 4

PAGE