Atlas Copco PHE 6 H Інструкція з ремонту - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з ремонту для Дриль. Atlas Copco PHE 6 H. Atlas Copco PHE 6 H 18 сторінок.

PHE 6 H:

Loosen both screws (4) and remove the

Detaching the

back part of the plastic housing (5).

bearing housing

Remove the plastic housing (1).

Loosen the screws (3) and remove the

nosepiece (2).

Loosen the screws (9) and remove the

bearing housing (8) with the O-ring (7).

Press the rotary shaft seal (6) from the

bearing housing (8).

PHE 6 S:

Insert a screwdriver (1) into one of the four

Dismantling the

service borings to lever off the round wire

spindle sleeve

ring (6). The screwdriver must remain in

the boring. Use a second screwdriver to

lever off the round wire ring through the

other service borings.

Take out the retainer (4) and remove the

O-ring (5).

Remove the recoil ring (2) and the rubber

ring (3).

Push out the anvil (7) with aid of a screw-

driver from the other side of the spindle

sleeve and remove the O-rings (8) from

the anvil.

Knock out the buffer (9) through the

grooves (A) in the spindle sleeve with aid

of a mandrel.

Repair Instructions No.181.03/98

PHE 6 H / PHE 6 S

7 6

PAGE