Atlas Copco 8423031287 Інструкція до продукту - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція до продукту для М'ясорубка Atlas Copco 8423031287. Atlas Copco 8423031287 12 сторінок. Die grinder

Safety and operating instructions

• Use a separate air filter of type Atlas Copco FIL, removes solid particles

larger than 15 microns and more than 90 % of liquid water, installed as

close as possible to the product and prior to any other air preparation unit

like REG or DIM (please see Air Line Accessories in our main catalogue).

Blow out the hose before connecting.

Lubricated models:

• The compressed air must contain a small quantity of oil. We strongly rec-

ommend that you install an Atlas Copco oil-fog lubricator DIM, to be set

normally at 3–4 drops (50 mm

las Copco single-point lubricator type Dosol for short cycle running tools.

For Dosol setting please see Air Line Accessories in our main catalogue.

Compressed air connection

WARNING Air under pressure can cause serious injury

Always shut off air supply, drain hose of air pressure and disconnect tool

►

from air supply when not in use, before making any adjustments to the

product, e.g. changing accessories, or when making repairs.

Never direct air at yourself or anyone else.

►

WARNING Whipping hoses can cause serious injury

Always check for damaged or loose hoses and fittings.

►

Check air pressure:

• The product is designed for a working pressure (e) of 6–7 bar = 600–700

kPa = 87–102 psig.

• The air pressure at the tool inlet with the product running must not exceed

the maximum operating pressure 7 bar – 700 kPa – 102 psig.

• Blow out the hose before connecting it.

To save time and to ensure correct capacity of the airline installation, from the

tapping point to the tool, we offer you an installation proposal.

Do not use quick disconnect couplings at tool.

Whenever universal twist couplings are used, lock pins must be installed.

For more information please read, Atlas Copco Industrial Power Tools cata-

logue Ordering No. 9837 3000 01.