Bose 131 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система Bose 131. Bose 131 23 сторінки. Marine loudspeaker system
Також для Bose 131: Посібник користувача (18 сторінок), Посібник користувача (37 сторінок), Посібник з експлуатації (7 сторінок), Посібник з експлуатації (7 сторінок), Посібник (7 сторінок)

Installing Your Speakers From The Front Of The Bulkhead

Mark six screw holes from the largest hole pattern on

B 2

the template, but do not drill yet. You may need to

mark and drill a different set of holes along the same

circle before finally attaching the flange.

Note: These markings are important to help keep the

saw blade inside the line you have just drawn.

Drill a starter hole that is large enough for your sabre

B 3

saw blade. Be sure to drill inside and close to the line

you have marked.

Using the sabre saw, cut the hole for the speaker,

B 4

carefully staying just inside the line. Take your time;

you want a smooth edged circular hole.

CAUTION: Be sure to stay inside the line you have

marked, and in particular, be sure to stay well inside

the hole pattern you have marked. The marked

holes, or others along the same circle, will be used to

secure the speaker and must not be too close to the

speaker hole. It is also important to stay inside the

line because any error you make could be visible

after the speaker grille is installed.

Use a half-round file or wood rasp to smooth out

B 5

any roughness in the speaker hole you have cut.