Bose 21725 Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система Bose 21725. Bose 21725 16 сторінок. Bose acoustimass 5 series iii speaker system owner's guide

Друкувати сторінку

5. Connecting the Acoustimass

Figure 5

Connecting the Acoustimass

module to your receiver

AM196451_05_V.pdf

5 Series III system to your receiver

1. Select one of the remaining two pairs of wires, and locate the left channel terminals on the

Acoustimass module marked INPUTS FROM AMP OR RECEIVER. Depress the red,

positive (+) tab, insert the marked wire and release the tab. Repeat the process for the

black, negative (–) tab and the plain wire (Figure 5).

2. Then follow the same procedure for the right channel, using the last pair of wires.

3. Disconnect your receiver or amplifier from the AC power (mains) outlet.

4. Locate the speaker outputs on your receiver. Connect the other ends of the wire from the

left channel of the Acoustimass module to the terminals marked L or LEFT. Make sure that

the marked wire is connected to the positive (+) and the plain wire is connected to the

negative (–) terminal.

5. Repeat these last two steps for the right channel.

6. Your set-up is complete. Plug in your receiver, turn the system on, and enjoy your Acousti-

mass 5 Series III speakers!

CAUTION: Before you plug in your receiver or amplifier, make sure that no strands of wire

from any terminal are brushing against any other terminal. Such "bridged" wires create short

circuits which can damage your receiver or amplifier.

October 23, 2001

Setting Up