Atlas Copco CS 14 Посібник з техніки безпеки та інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з техніки безпеки та інструкція з експлуатації для Будівельна техніка Atlas Copco CS 14. Atlas Copco CS 14 14 сторінок. Crawler for christensen core drilling rig
Друкувати сторінку
Safety and operating instructions
Depressurize the hydraulic system before
performing maintenance on the hydraulic equipment.
Never replace high pressure hoses with hoses of
lower quality than the original or with hoses that
have removable couplings
Pressure settings are always performed on a
pressurized system.
Always exercise the greatest caution.
Pressure settings must only be performed by trained
personnel.
WARNING Machine modification
Any machine modification may result in bodily injuries
to yourself or others.
Always contact your Atlas Copco Customer Center
before you modify the machine.
Always use original parts and accessories approved
by Atlas Copco.
WARNING Heavy machine can cause serious
injury
During service and maintenance work, all
components that may be brought into motion or fall
must be supported or tied secure.
WARNING Thermal cracks may arise when
welding
Do not do any welding on the equipment without
consulting Atlas Copco.
WARNING The paint contain substances
hazardous to health
Substances are formed when the paint is heated which
are hazardous to health.
Welding, grinding and other hot work involving
paint being heated must only be carried out where
sufficient ventilation can be used.
Always use compressed air powered breathing
protection, eye protection and gloves.
WARNING Hot engine parts can cause burn
Make sure the engine is turned off before all
maintenance work and before refueling
Be careful when draining hot oil and fluids
Do not handle flammable fluids in the vicinity of hot
surfaces, sparks or naked flames.
WARNING Pressure vessel can cause serious
injury
Discarded accumulators must be rendered
harmless.
A discarded pressure vessel that has not been
punctured must be treated like a pressure vessel.
Take care when evacuating the accumulator.
WARNING Electric shock
8
Only authorized electricians may carry out work on
the electrical system.
Only qualified electricians should perform any
electrical troubleshooting or maintenance. Remove
all watches and rings that could contact live electric
circuits.
Make sure all power to the system has been cut
before carrying out any maintenance work.
All electric cabinets should remain locked when not
under direct control of qualified electrician.
Do not use the cabinets as a toolbox or spare
parts storage container. The inherent vibration and
magnetism associated with transformer and motor
starters can cause inadvertent contact of foreign
objects with live circuits.
Some electrical components may have power when
the main circuit breaker is open, verify that power is
disconnected before servicing.
Do not tamper with safety interlock circuits, safety
guards or other safety devices, except as required
during normal maintenance and troubleshooting.
Confirm that all safety devices and circuits are
replaced and functioning before operation is
resumed.
Shut of electrical power while making or breaking
electrical cables.
CAUTION
Skin eczema
Hydraulic oil can cause eczema when it comes in
contact with the skin.
Avoid getting hydraulic oil on your hands.
Always use protective gloves when working with
hydraulic oil.
© 2010 Atlas Copco Craelius AB | 2010-06-18
02 Safety Instructions CS14C Ed.0