Bose Acoustimass10 Series IV Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система Bose Acoustimass10 Series IV. Bose Acoustimass10 Series IV 18 сторінок. Home entertainment speaker systems
Також для Bose Acoustimass10 Series IV: Посібник користувача (18 сторінок), Посібник користувача (16 сторінок)
Друкувати сторінку
Setting Up
Check the connections
Check all connections from the receiver to the Acoustimass
cube speakers (Figure 9). Make sure all speakers are connected to the proper terminals
according to their position in your room. Also make sure the two speakers with black
terminal tabs are connected as front speakers.
At the receiver, check that the wires are connected in phase (+ to + and – to –). Incorrect
wiring can result in a total loss of Acoustimass module output.
Be sure to correct any wiring problems before you plug your receiver in and turn it on.
L
FRONT SPEAKERS
R
L
LS
10
C
R
SURROUND SPEAKERS
L REAR R CENTER
RS
December 20, 2001
®
module and the module to the
OUTPUTS
TO CUBE SPEAKERS
L
C
R
LS
RS
LEFT
CENTER
RIGHT
LEFT
RIGHT
SURROUND
SURROUND
INPUTS
FROM RECEIVER OR AMPLIFIER
L
C
R
LS
RS
CAUTION:
Do not allow exposed wires to
brush against each other; this
could damage your receiver.
Figure 9
Completed connections
AM183644_01_V.pdf