Atlas Copco 8432084425 Інструкція до продукту - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція до продукту для Викрутка-шуруповерт Atlas Copco 8432084425. Atlas Copco 8432084425 16 сторінок.
Друкувати сторінку
QMC21-25-HM4
Please visit:
https://servaid.atlascopco.com
Accessories
Optional accessories
Tool cable 2.0 m
Tool cable 3.5 m
Bit grounding test
Bit grounding is measured by the ground circuit stability and resistance with the tool running at no load
with a rotation speed of 200 rpm. Resistance is measured between the special bit 4216 2194 00 and the
outside of the tool connector and the resistance limit is 20 Ω.
Bit run out test
Bit run out is measured with the tool securely fastened in a test rig and with the tool running at no load
with a rotation speed of 200 rpm. Measuring point is at 44 mm (length of a standard bit) out on a special
bit 4216 2194 00. Bit run out limit is 0.15 mm.
EN
or www.atlascopco.com.
© Atlas Copco Industrial Technique AB - 9836 9922 01
8432 0835 02
8432 0835 03
Product Information
5