ABSCO SHEDS CPSN2 Посібник - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник для Намет ABSCO SHEDS CPSN2. ABSCO SHEDS CPSN2 19 сторінок. Skillion carport

CENTRE CROSS BEAM

Mark the position for the centre-most cross beam

on the side beams.

REAR

Using the joiner angle ZACO131 as a template,

drill two 10mm holes in each end of the centre

cross beam, it's the longest at 2850 mm.

Secure two ZACO131 to each end of the cross

beams with two M10 x 20 mm bolt and a nut with

washers both sides.

Make sure these are flush with the top face of the

cross beam to achieve a level surface to attach

the roof sheets to.

Position the ZACO179 joiner plate on the side

beam to the dimension shown above and drill

two 10mm holes in the beam, using it as the

template.

Move the ZACO179 inside the beam and to act

as a large washer for the bolts.

Absco Industries

Assembly Instruction Manual

ABSCO SKILLION CARPORT

MODEL: CPSN2

3.00mW x 5.50mD x 2.37mH

Open side to rear

2725

CENTRE CROSS BEAM

5490

ZACO179

ZACO131

Secure cross beams to the side beams as shown

with two M10 x 20 mm bolt and a nut with

washers both sides.

Model: CPSN2

SIDE BEAM

FRONT

2725

ZACO131

24/11/22