Atlas Copco QMC41-50-HM4 Інструкція до продукту - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція до продукту для Викрутка-шуруповерт Atlas Copco QMC41-50-HM4. Atlas Copco QMC41-50-HM4 16 сторінок.

QMC41-50-HM4

Installation

For details, please refer to the dimensional drawings.

Attach the tool to the fixture in one of the following ways:

A: Using the threads at the front part, accessible under the thread protection ring.

B: Using the holes of the tool base.

Four holes are intended for screws and two holes are intended for guide pins.

Connect the tool to the drive using the supplied cable.

NOTICE Make sure the cable is not bent more than a radious of 55 mm (2.2 in).