Bose ShowMatch DeltaQ SMAFT Інструкції з монтажу та безпеки - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкції з монтажу та безпеки для Акустична система Bose ShowMatch DeltaQ SMAFT. Bose ShowMatch DeltaQ SMAFT 13 сторінок. Array rigging frames

Друкувати сторінку

Important Safety Instructions

Please read this installation guide carefully and save it for future reference.

This product is intended for installation by professional installers only! This document is intended to provide professional installers with basic

installation and safety guidelines for this product in typical fixed-installation or portable-system applications. Please read this document and all safety

warnings before attempting installation.

WARNINGS:

•

All Bose

products must be installed in accordance with local, state, federal and industry regulations. It is the installer's responsibility to

ensure installation of the loudspeakers and mounting system is performed in accordance with all applicable codes, including local building

codes and regulations. Consult the local authority having jurisdiction before installing this product.

•

Unsafe mounting or overhead suspension of any heavy load can result in serious injury or death, and property damage. It is the

responsibility of the installer to evaluate the reliability of any mounting method used for their application. Only professional installers with

the knowledge of proper hardware and safe mounting techniques should attempt to install any loudspeaker overhead.

CAUTION:

•

Installed loudspeaker arrays require regular inspection and routine maintenance to ensure proper function and

safe operation. Inspect mounting hardware and attachments for signs of corrosion, bending or any other condition that may decrease the

structural integrity. Immediately replace worn or damaged components.

•

Do not make unauthorized alterations to this product; doing so may compromise safety, regulatory compliance, system performance, and

may void the warranty.

NOTE: Always use Bose Modeler

connection points.

Guidelines for Installation and Setup of ShowMatch Array Module Loudspeakers

The installation information contained in this document is only a general guideline and cannot, as such, represent all requirements and precautions.

Accordingly, anyone using this material assumes all liability and is expressly responsible for the safety of all loudspeaker array designs and mounting

configurations applied in practice.

•

Prior to the installation or portable-system setup of any overhead loudspeaker, a licensed professional engineer must approve the location and method

of attachment to the building structure or support-truss structure and confirm they are consistent with all building codes and regulations. Ensure the

mounting surface and the method of attaching the loudspeaker system to the surface is capable of supporting the total weight of the system. A safety

factor of 10:1 is recommended.

•

Obtain all mounting system components from reputable manufacturers. Select a mounting system appropriate for your loudspeaker system and

its intended application. We recommend Bose mounting accessories when available. A licensed professional engineer must review the design and

fabrication of any custom mounting hardware.

•

Do not suspend loudspeaker using handles as attachment points. Handles are NOT designed for load bearing!

•

Use a safety cable, separately attached to the cabinet, at a point not in common with the load bearing attachment points of the mounting system to

the loudspeaker. This is recommended even if not required by local regulation. Consult a licensed professional engineer or a rigging professional for

proper design and installation.

•

Do not under any circumstances climb the array.

2 - ShowMatch

DeltaQ

or Bose Array Tool software to confirm safe working load limits with exact array configurations, pitch angles, and

Array Rigging Frames - Important Safety Instructions

pro.Bose.com