Restore the Factory Default Settings
Restoring the factory default settings will do the following:
Clear the list of Bluetooth devices paired to the VB1.
Clear the camera presets (Preset 1 and Preset 2).
Return all camera, microphone, and speaker settings to their default values.
(Many of these settings are configured in the Bose Work Configuration software
or Management software.)
Reset the administrator password to
Note: We recommend changing the password after resetting it.
To restore all settings of the VB1 to their factory defaults, do one of the following:
On the remote control, press and hold the Home button and Autoframe button
simultaneously for 5 seconds.
On the side of the VB1, press and hold the Mute button and Bluetooth button
simultaneously for 5 seconds.
A small bar of lights in the center of the light bar will pulse white repeatedly. The
lights will then move outward from the center until the whole light bar is lit solid
white. The lights turn off in the same pattern. When this process is completed, the
VB1 will restart with its factory default settings.
Forgotten Password
If you have forgotten the password to access the Administrator configuration settings,
you must restore the factory default settings to reset the password (see Restore the
Factory Default Settings (Page 42)).
Note: We recommend changing the password after resetting it.
Update the Software
You can use the Bose Work Configuration app and Bose Work Management app to
check for and install VB1 firmware updates. See Software Applications (Page 23)
to learn how to download and access these software apps.
If you are using the Bose Work Configuration WebUI to configure the VB1, you may
not be able to automatically check or update the firmware from the online Bose server
unless your computer is also connected to Internet.
If you cannot access firmware updates while using the WebUI, do one of the following
instead:
Use the Bose Work Configuration app.
Use the Bose Work Management app.
Download the firmware file directly to your computer, and then use the Bose Work
Configuration WebUI to update the firmware as if it were a previous version.
CA RE A N D M A IN T E N AN CE
Bose123!
|
4 2
E N
Друкувати сторінку