System Installation Instructions
Installing the TV on/off detector (optional)
Figure 16
TV on/off detector installed
on your TV
Turning off the internal speakers in your TV
18
The TV on/off detector senses whether your TV is on or off. This enables the media center to
automatically switch the TV on, as needed, when another video source (DVD, cable/satellite
box, etc.) is selected. If you choose not to use the sensor, you will need to turn the TV on sep-
arately each time it is needed.
Note: This device will not work with LCD and plasma TVs, so if you are using those devises
you may want to skip these steps.
1. Plug the connector on the end of the cord into the TV SENSOR jack on the back of the
media center.
2. Position the TV on/off detector on the back of your TV as shown in Figure 16.
Note: DO NOT use the mounting strip yet to affix the detector. Wait until your system is oper-
ating and you can determine that the sensor is working properly from this location. Refer to
"Testing the TV on/off detector" in your LIFESTYLE
Back of TV
TV on/off detector
Note: If you have a projection TV, the bottom rear of the enclosure is the best location for
mounting the detector.
When you listen to TV sound through your LIFESTYLE
should not be on. Use the on-screen menus in your TV to select "Internal Speakers: Off" (your
on-screen message may be different). You can also lower the volume of your TV to its lowest
setting. Refer to your TV owner's guide for detailed instructions.
AM259777_02_V.pdf • April 23, 2002
®
Operating Guide.
Mounting the detector
using the mounting strip
Media center rear panel
RECORD
TAPE
AUX
VCR
TV
33V
DC POWER
1.1A
TV
SENSOR
VIDEO INPUTS
COMPOSITE
S-VIDEO
AM
L
L
L
L
L
FM
75
IR
ANTENNA
EMITTER
R
R
R
R
R
1
OPTICAL
OPTICAL
SERIAL
DATA
2
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
INPUT
OUTPUT
SPEAKER
COMPOSITE
S-VIDEO
ZONES
AUDIO OUTPUTS
AUDIO INPUTS
VIDEO OUTPUTS
TV SENSOR
jack
®
system, the speakers in your TV
Друкувати сторінку