Bose ControlSpace AMS-8 Посібник з програмного забезпечення - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з програмного забезпечення для Стереосистема Bose ControlSpace AMS-8. Bose ControlSpace AMS-8 32 сторінки. Audio management system
Також для Bose ControlSpace AMS-8: Посібник користувача (16 сторінок)
Друкувати сторінку
1.4 Room combining/ Paging/ GPIO settings
1.4.1 Preset/Paging/Contact module
1. ControlSpace
With this module one can configure/change the Room Combining Presets and program the Paging Panel
Buttons and GPIO Contacts.
Press or use the following buttons or faders to:
use this module to configure or change Room Combining Presets
use this module to configure or change Paging Panel Buttons
use this module to configure or change GPIO Contacts
change the name of a preset, paging button/zone or contact
change the 'Default Active' settings (only for Room Combining Presets). A preset which has
the status 'Default Active' will be active when the system is started up as long as there is no
Room-overlap between different presets which need to be active at the same time.
change the 'User Enable/Disable' settings (only for Room Combining Presets).
Only if set to 'User Enabled', the user is allowed to turn a preset on or off.
change up to 3 additional paging levels (only in combination with Privileged User Software).
See below picture
upload the new Preset, Paging and Contact settings to the AMS-8 system rack
AMS-8 LIvE Installer Software
™
Info Field
11