Bose Panaray 502A Посібник з монтажу - Сторінка 20
Переглянути онлайн або завантажити pdf Посібник з монтажу для Стереосистема Bose Panaray 502A. Bose Panaray 502A 24 сторінки. Full-range-driver array loudspeakers
Також для Bose Panaray 502A: Технічна інформація (4 сторінок), Посібник з монтажу (12 сторінок), Посібник (4 сторінок), Посібник з монтажу (32 сторінок)
Друкувати сторінку
- 1. Panaray Series IV Loudspeaker Dimensions
- 2. Panaray ® 802 ® Series IV Loudspeaker U-Bracket
- 3. Panaray ® 802 ® Series IV Loudspeaker Mounting Options
- 4. Installation
- 5. Recommended Power Amplifiers
- 6. Recommended Dsp Settings
- 7. Panaray 802 Series IV Loudspeaker Specifications
- 8. Panaray 502 a Series Loudspeaker Specifications
Technical Information
Panaray
802
Series IV Loudspeaker Specifications
®
®
System Performance
Frequency Range (-10 dB)
(1)
Recommended High-Pass Protection Filter
Nominal Coverage Pattern
Loudspeaker EQ
Overload Protection
Power Handling, long-term continuous
Power Handling, peak
Sensitivity (SPL / 1 W @ 1 m)
(4)
Calculated Maximum SPL @ 1 m
Calculated Maximum SPL @ 1 m, peak
Transducers
Full-range Drivers
Nominal Impedance
Physical
Enclosure Material
Grille
Environmental
Connectors
Suspension / Mounting
Dimensions (H xW xD)
Net Weight
Shipping Weight
Product Code
Black
Notes:
1. Frequency range measured on-axis with recommended EQ in an anechoic environment.
2. Bose extended-lifecycle test: pink noise, IEC268-5 filtered, 6-dB crest factor, 100-hour duration, with recommended EQ.
3. AES component test: pink noise, IEC268-5 filtered, 6-dB crest factor, 2-hour duration, with recommended EQ.
4. Sensitivity measured in anechoic acoustic boundary conditions with recommended EQ, referenced to 1 W/m.
5. Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression.
For additional specifications and application information, please visit pro.Bose.com. Specifications subject to change without notice.
20
power limiting circuit (non-fused; automatic reset)
Bose extended-lifecycle test
Free field
(5)
8 x Bose 4.5-inch (114 mm) full-range cone transducers
8 x M8 threaded inserts (2 back, 2 bottom, 4 sides)
336 mm x 523 mm x 335 mm (13.2" x 20.6" x 13.2")
Panaray
802
Series IV
®
®
52 Hz – 15 kHz
55 Hz with minimum 12 dB / octave filter
120° H x 100° V
active EQ required for optimal performance
(2)
240 W
960 W
92 dB
116
122
8 ohms
mineral-reinforced HDPE
power-coated steel grille
outdoor per IEC 529 IP55
2 x Neutrik
NL4 wired parallel
®
13.6 kg (30 lb)
17.2 kg (38 lb)
739058-0110
AES component test
(3)
300 W
1200 W
Free field
92 dB
117
123
pro.Bose.com