Adding a Wi-Fi
If your network information has changed, or to connect your system to another
network, you must add the new network information in the app and then connect
the system.
1.
Launch the SoundTouch
2.
Click EXPLORE > SETTINGS > Systems.
3.
Select the system.
4.
Click CONNECT TO A WI-FI NETWORK.
5.
Follow the instructions on your computer.
Troubleshooting
For more troubleshooting information, refer to the Help system in the
SoundTouch
app.
™
Problem
Cannot complete network setup
Cannot connect to network
Intermittent or no audio
Cannot hear an AirPlay stream
Care and Maintenance
®
network
™
app.
What to do
Ensure network name and password are correct
Ensure network service is available and system and
computer are on the same network
Move system closer to wireless router or access point
Stop other audio or video streaming applications
Close app, disconnect all cables, and restart setup
process
If your network information has changed or to
connect your system to another network, see
"Adding a Wi-Fi
®
Try connecting to the network using an Ethernet cable
Move system away from possible interference
(microwaves, cordless phones, etc.)
Stop other audio or video streaming applications
Ensure system is powered and connected to the
same network as the computer
Move system or audio source closer to wireless router
or access point
Ensure system volume is not muted or too low
Unplug the power cord; reconnect after one minute
Ensure system and AirPlay device are connected to
the same network
Ensure AirPlay device is playing; increase its volume
Ensure system is selected in the AirPlay menu of the
device
Move AirPlay device away from possible interference
and closer to the wireless router or access point
Note: Proximity of the AirPlay device to the system is
not important, only to the wireless router or
access point
network"
English - 23
Друкувати сторінку