Bose Wave Radio Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Стереосистема Bose Wave Radio. Bose Wave Radio 12 сторінок. Owner's guide
Також для Bose Wave Radio: Посібник користувача (16 сторінок), Посібник користувача (20 сторінок), Посібник з швидкого налаштування (1 сторінок), Посібник користувача (27 сторінок), Посібник користувача (26 сторінок)

Друкувати сторінку

Using your pedestal with components connected

Figure 7

AUX 1, AUX 2, and AUX 3

buttons on the pedestal for

the Wave radio

/CD

(shown)

Troubleshooting

Problem

No sound or

sound is mufﬂed

A connected source is

playing, but no LED is lit

With auxiliary sound sources connected to your pedestal, you can easily command Wave

radio sound from them.

Before you begin to enjoy the sound, however, take note of which component is connected to

INPUT 1, 2, or 3 on the back of the pedestal. Those numbers coincide with the AUX buttons

on the pedestal front panel, which you will press to select the component you want to hear

(Figure 7).

To select and play a speciﬁc component

1. Turn on your component using its remote or console Power button.

2. Turn on the Wave

radio/CD (or Wave

CD remote control AUX button will do both).

3. Press the AUX 1, 2, or 3 button on the front of the pedestal.

Note that the green LED (below the AUX button you press) lights up.

To adjust the sound

Use the Wave

radio/CD (or Wave

component that is playing.

Use the component remote control or console buttons to adjust any other feature of that

sound source and to turn the component off, as well as on.

What to do

•

Make sure that both the pedestal and the radio are plugged into a functioning

power outlet.

•

Check the connection of the component to the pedestal. Make sure it is connected to one

of the three pairs of INPUT jacks on the back of the pedestal.

•

Make sure the pedestal RCA connectors are inserted into the AUX IN jacks, red-to-red

and white-to-white, on the Wave

Wave

radio to its pedestal" on page 5.

•

Make sure that both the pedestal and the radio are plugged into a functioning

power outlet.

X 1

A U

radio) and select AUX (pressing the Wave

radio) remote to increase or decrease the volume of the

/CD radio/CD (or Wave

Getting The Sound

X 3

A U

X 2

A U

LEDs

radio). Refer to "Connect your

radio/