Bose SoundTouch 20 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Конвертер мультимедіа Bose SoundTouch 20. Bose SoundTouch 20 26 сторінок. Enabling standby low power mode
Також для Bose SoundTouch 20: Посібник із швидкого старту (2 сторінок), Посібник користувача (40 сторінок), Посібник користувача (32 сторінок), Посібник (9 сторінок), Посібник із швидкого старту (2 сторінок)

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water or moisture.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

10. Use only attachments/accessories specified by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged

in any way: such as power supply cord or plug is damaged; liquid has been spilled or objects have fallen into

the apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or has been

dropped.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm-

ful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B)/NMB-3(B)

Changes or modifications not expressly approved by Bose Corporation could void the user's authority to operate

this equipment.

In USA and Canada

This device complies with part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC and Industry Canada radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20 cm between radiator

and your body.

This device complies with Industry Canada licence-exempt RSS standards(s).

Safety

English - 3