Bose FreeSpace 32 Посібник інсталятора - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник інсталятора для Підсилювач Bose FreeSpace 32. Bose FreeSpace 32 23 сторінки.
Також для Bose FreeSpace 32: Посібник інсталятора (17 сторінок)
3.5
Setting taps
Set the transformer to the preferred wattage (Figure 5):
1.
Locate the blue wire.
2.
Disconnect the smaller tab from the shipped setting (8W on Model 8
loudspeakers, 32W on Model 32 loudspeakers).
3.
Reconnect to the preferred tap setting.
1
3.6
Cutting mounting holes
Cut the mounting hole (Figure 6).
•
The hole for a FreeSpace
•
The hole for a FreeSpace Model 32 loudspeaker should be 7
Note: Check for electrical conduits and other hazards before cutting the mounting
hole. Also avoid glass fiber insulation. Insulation can interfere with the mounting
springs, making installation or changing tap settings difficult. It can also compress
and push the loudspeaker out of the mounting hole after installation.
8
4
1
2
–
+
8
C
2
4
–
+
8
4
1
2
–
+
®
Model 8 loudspeaker should be 5
AM177915_03_V.pdf • May 6, 2002
Model 8
tap settings
C
C
Model 32
tap settings
3
/
" (145 mm).
4
3
/
16
3.0 Before You Begin
Figure 5
3
5
/
" (Model 8)
4
7
3
/
" (Model 32)
16
Figure 6
" (182 mm).
9