Bose PackLite Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Bose PackLite. Bose PackLite 15 сторінок. Power amplifier

English

Dansk

Top panel indicators

The top panel of the A1 has two indicators that tell you the state

of the amplifier.

Figure 3

A1 top panel

Signal indicator:

GREEN when a signal is present at the

input.

RED when amplifier is over-driven and

limiting function is activated to prevent

damage to the connected loudspeaker.

Setting up a single A1

The A1 amplifier is designed to add more bass output to a system

that already has two B1 bass modules connected to the Amp 3

OUT connector on the PS1 power stand. The A1 amplifier can

power up to two additional B1 bass modules.

Follow these steps to set up the A1 as shown in Figure 4 on

page 8.

Deutsch

Español

Connect the AC power cord to an AC (mains) outlet.

Make sure the A1 amplifier Power switch is OFF.

Using the supplied ¼" TRS cable, connect the Bass-Line

OUT connector on the PS1 power stand to the INPUT

connector on the A1 amplifier.

Connect a B1 bass module cable from the OUTPUT

connector on the A1 to a B1 bass module. If desired,

connect a second B1 to the first B1.

Set the A1 power switch to ON (I).

Français

Italiano

ACK

ITE

OWER

Power indicator:

BLUE when amplifier

is on and ready to

use.

Nederlands

Svenska

MPLIFIER

ODEL