Drolo Moon Rabbit Phaser Посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник для Музичне обладнання Drolo Moon Rabbit Phaser. Drolo Moon Rabbit Phaser 6 сторінок. Phaser

Connecting and powering:

The power supply needs to be 9V/100ma center negative like the common BOSS power supplies:

Make sure the polarity of your power supply is correct or it will damage the pedal. D

o NOT run at higher voltages.

Since the pedal has a digital microprocessor operating with high frequencies, you might hear some high pitched

noise if you use it together on the same power supply with other pedals (daisy chained) even when it is off. The

noise can bleed through the power supply into the other pedal's signal. This is normal for such devices. It might not

be the case in your particular setup but if you notice that, I would suggest using an isolated power supply for the

tremolo.

Controls: