DROMEAS Alma HT Інструкція з експлуатації Посібник з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Внутрішнє оздоблення приміщень DROMEAS Alma HT. DROMEAS Alma HT 12 сторінок. Working desk
Також для DROMEAS Alma HT: Інструкція з експлуатації Посібник з експлуатації (17 сторінок)
Друкувати сторінкуAlthough the collision tracking system reliably detects even very small unusual movements
of the desk surface, it cannot be 100% guaranteed to avoid injuries to office users or
nearby people. As a result, no liability for body injury or other damages is assumed! Users
are responsible for avoiding injury and other damage during office operations.
3.7 Care and maintenance
When using the working desk for the first time, you may notice oil traces in lifting units. Please
wipe with a dry or slightly damp cloth. Commercial detergents available to clean the office
surfaces can be used. Only use care and cleaning products that are suitable for the respective
materials (wood, plastic, metal). The use of chemical or biological cleansers is not required.
The electric height adjustment mechanism of the desk does not require maintenance. Other
maintenance work must only be carried out by authorized specialist personnel.
A five year warranty is given for good operation. With regard to electrical components, a two-
year warranty is provided.
CAUTION: Moisture may damage the control unit and the control unit!
Keep the controller and control unit away from moisture and water
3.8 Disassembly
Disassembly must be carried out by qualified personnel. For reassembly, refer to section "3.3
Assembly and Installation".
3.9 Storage and transportation
A pallet truck is required to carry the desk. If unpacking is to be done on the floor, protective
material or carpet should be placed on the floor to avoid possible damage to the surface of the
office.
If storage is temporary, consider the maximum ambient temperature or humidity for storage
and transportation (see section 2.3.2).
WARNING: Risk of injury and damage!
When lifting the desk surface or attachments, the fastening screws may crack. When
transporting or moving the work desk, hold it only from the frame.
3.10 Disposal, reuse, recycling
The product is designed to minimize the impact on the environment during its life cycle. All its
parts, which are made of plastic, metal and wood, are recyclable. On the other hand, replacing
parts of the product is easy if there is wear, so the product is not totally rejected.
If the product is ultimately disassembled and disposed of, please:
1. Disconnect the working desk from the power connections
2. Disassemble the working desk in individual parts