Elegoo MARS 4 Series Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для 3D-принтери Elegoo MARS 4 Series. Elegoo MARS 4 Series 20 сторінок.
Також для Elegoo MARS 4 Series: Посібник користувача (20 сторінок)
Друкувати сторінку
Notice:
Please keep the 3D printer and its accessories out of the reach of children.
Please fill the resin tank no less than 1/3 of its volume, but do not exceed the MAX line position.
Please place the printer in a dry environment and protect it from rain and moisture.
If you run into an emergency during use, please turn off the power supply of the 3D printer first.
Please use the printer indoors and avoid direct sunlight and a dusty environment.
Please keep the original packaging box for 30 days for return/exchange (only ELEGOO original
packaging boxes are accepted).
Please use 95% (or higher) ethyl alcohol or isopropyl alcohol to wash your model unless you are
using water washable resin.
If the printing fails, you need to clean the excess cured resin in the resin tank and change the resin,
otherwise, it may cause damage to your printer.
When operating the 3D printer, please wear a mask and gloves to avoid direct skin contact with
the photopolymer resin.
When you use the 3D printer for the first time, please level the build platform according to the
leveling tutorial before printing.
If the release film in the resin tank is whitened, scratched, or has no elasticity, the printing failure
rate is high, please replace the release film in time.
If you have any problems with the printer, please contact us at [email protected]. Please do not
disassemble or modify ELEGOO 3D printers by yourself, otherwise, the warranty will expire.