Drop SC-64 Посібник з монтажу - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник з монтажу для Диспенсер для води Drop SC-64. Drop SC-64 20 сторінок.

INSTALLATION INSTRUCTIONS

System Setup

Attach safety overflow line

(1/2" tubing) to barbed

fitting on side of brine

tank and run to appropriate

discharge point that is

lower than the overflow

connection on the brine

tank. Do not tee into any

other drains.

Pass the salt sensor power

cord through the provided

hole from the inside of the

brine tank. Install the salt

sensor unit onto the top

of the brine well. Install the

cord grip around the salt

sensor power cord and

insert it into the hole in the

brine tank. Install the

supplied rubber band onto

the hooks on top of the salt

sensor unit.

Add water to brine tank

approximately 1" above the

grid plate. Do not add salt

to the brine tank at this

time.

1/2" Overflow

Connection

Power

Cord

Fill water 1"

Fill water 1" above

above grid plate

gridplate.

Rubber

Band