Droplet SP2 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Вимірювальні прилади Droplet SP2. Droplet SP2 13 сторінок. Beam-scan camera and software

Operation

The Visulux software is computationally intensive and testing of the simultaneous operation of

the Visulux software and the SP2 acquisition software has not been conducted. No conflicts are

expected, but the performance of both software operations simultaneously is not known. It is

possible that these programs can operate simultaneously, but it is the responsibility of the user

to determine the suitability of the SP2 computer for simultaneous operation.

Remove the YAG power monitor and insert the pin (See Appendix B) of the Mightex camera into

the bracket mounted on the SP2. The bracket provides the proper alignment for the camera and

no alignment adjustments are needed. If a simple check of the laser mode is being conducted,

start the Visulux software, and in addition to the basic control window, it is suggested that the

surface and plot windows be opened. These are initialized by clicking on the appropriate boxes

in the View menu of the tool bar. Turn on the SP2 instrument, and if the Visulux software is

being used on a separate computer, the standard SP2 startup and operation is recommended. If

the user is operating the Visulux software on the SP2 computer and is testing performance with

both software packages, it is recommended the standard SP2 operation be set up and then the

Visulux software started.

DOC-0175 Rev D