Anker EUFY T8910 Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари Anker EUFY T8910. Anker EUFY T8910 9 сторінок. Motion sensor
Друкувати сторінку
Use the Motion Sensor
After the motion sensor is installed, the alarm will be triggered once movement is
detected within the motion sensor's coverage area.
When the motion sensor is working, its LED indicator shows as below:
LED Status
Description
Blinking blue
Movement detected while the HomeBase is connected
Blinking red
Movement detected while the HomeBase is not connected
When the motion sensor is in the test mode, the LED indicator shows as below:
LED Status
Description
Solid red
Enter the test mode successfully
Movement detected when the motion sensor is in the test
Blinking red for 1 second
mode
Off
Failed to enter the test mode
10 English
Replace the Battery
When the motion sensor's battery is low, the LED indicator shows as below. ou
should replace the battery to keep the motion sensor working.
LED Status
Description
Blinking blue
Movement detected while the HomeBase is connected
Blinking red
Movement detected while the HomeBase is not connected
SPECIFICATIONS
Battery: 1× CR123A battery
Operating Temperature: -10ºC - 40ºC /14°F - 104°F
Storage Temperature: -20ºC - 60ºC /-4°F - 140°F
English 11