AnkerMake M5 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для 3D-принтери AnkerMake M5. AnkerMake M5 18 сторінок.

Printing

On the touch screen or in the AnkerMake app, select a file from Local/Internal or USB

to start printing, then follow the onscreen instructions to complete the printing. You can

also start printing via the AnkerMake Slicer.

• Always check and update the firmware to the latest version before use.

• Make sure that the 3D printer is placed on a flat, stable surface.

• The recommended ambient temperature is 59°F-95°F/15°C-35°C and the relative

humidity should be ranged from 30% to 70%.

• When printing with ABS materials, place the device in a well-ventilated area as it will

emit pungent fumes.

• Remove any object from the PEI Plate before printing.

• The PEI Plate should not be cleaned with bare hands, as grease and sweat will

impair print adhesion. Remove dust and grease from the PEI Plate by rubbing alcohol

to enhance its adhesion. If necessary, wash the plate with soapy water and dry it

completely.

• Check whether there is any wire residue in the groove of the Y-axis double belts

before printing.

Go to Start and select the file to be printed for a preview.

Adjust the parameters.

Start printing.

When the printing is completed, remove the PEI flexible steel plate, then gently bend

the folded steel plate to remove the workpiece.

Remove the model support.