Daikin BRC7EA631 Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з монтажу для Пульт дистанційного керування Daikin BRC7EA631. Daikin BRC7EA631 16 сторінок. Wireless remote controller kit
Також для Daikin BRC7EA631: Посібник з експлуатації (20 сторінок)
Друкувати сторінку
2. Setting the address of wireless remote controller (It is factory set to "1")
Setting from the remote controller
1. Hold down the
for at least 4 seconds to get the Field Set mode.
(Indicated in the display area in the figure at right.)
2. Press the
setting (A/b). Each time the button is pressed the dis-
play switches between "A" and "b".
3. Press the "
2
address.
!
Address can be set from 1 to 6, but set it to 1 ~ 3 and
to same address as the receiver. (The receiver does
not work with address 4 ~ 6.)
-5- 8-
4. Press the
5. Hold down the
quit the Field Set mode and return to the normal
display.
Multiple settings A/b
When the indoor unit is being operated by outside control (central remote controller, etc.), it sometimes does
not respond to ON/OFF and temperature setting commands from this remote controller. Check what setting
the customer wants and make the multiple setting as shown below.
Remote controller
Multiple setting
A: Standard
b: Multi System
3. Attach the included unit number nameplate (5)
to the front grill on the indoor unit and the back
of the wireless remote controller.
[PRECAUTIONS]
Set the unit number of the receiver and the wire-
less remote controller to be equal. If the setting
differs, the signal from the remote controller
cannot be transmitted.
English
button and the
AN
button and select a multiple
" button and "
" button to set the
OWN
"
#
$
button to enter the setting.
button for at least 1 second to
TEST
Remote controller display
All items displayed.
Operations remain dis-
played shortly after exe-
cution.
button
TEST
ode
Address
ultiple setting
Movement when the operation is controlled by the
other air conditioners and equipment
When operation changeover, temperature setting or
the like is carried out from the remote controller, the
indoor unit rejects the instruction.
(Signal receiving sound "peeh" or "pick-pick-pick")
As a result, a discrepancy between the operation
state of the indoor unit and the indication of the
remote controller display occurs.
All commands accepted.
(Signal receiving sound "pick-pick")
Since the indication of the remote controller is turned
off, no discrepancy such as mentioned above occurs.
ON OFF
TE P
TI E
SETTING
UP
FAN
RESERVE CANCEL
SWING
/TEST
Front grille
Unit No. nameplate (5)
Wireless remote
controller
DOWN
TI ER
"
ODE
#
4