DROPSA 3135121 Посібник з експлуатації та обслуговування - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з експлуатації та обслуговування для Системи змащення DROPSA 3135121. DROPSA 3135121 14 сторінок. Chain lubrication & dispensing
Друкувати сторінку
1. INTRODUCTION
This manual refers to the Vip4chain Lubrication device. You can find additional copies and newer revisions of this
document from out website http://www.dropsa.com. Alternatively contact one of our sales offices.
Please read this manual carefully, as it contains important information on health and safety issues. A copy of this
manual should remain with the user of the product.
2. GENERAL DESCRIPTION
The Vip4chain has been designed to be used for Air/Oil Chain Lubrication, Spray or dispensing applications.
The unit consists of a base module which houses the electronic control and monitoring system. The unit can then be
configured to have one or more (max. 6) dispensing modules which consist of a adjustable micropump (0-30 mm.³)
fitted onto a modular mixing base element. This element both monitors the correct oil injection and mixing the oil into
an air jet that fires it onto the lubrication point.
The system is completly modular and very compact therefore can be quickly and easily installed by following the
instructions in this manual.
3. PRODUCT – MACHINE IDENTIFICATION
The product identification label is located on the front side of the reservoir and contains details of the operating
parameters of the unit including input voltage and required air supply.
4. TECHNICAL CHARACTERISTICS
Operating Voltage
Power Consumption
Air Input Pressure
Remote Alarm Signal
Operating Temperature
Max. Working Humidity
IP Protection Grade
Compatible Lubricants
Oil Viscosity
Storage Temperature
:
WARNING
do not operate the units outside the parameters indicated.
Vip4chain
24 Vdc
110 Vac
10 W
5 ÷ 8 bar
RELAY signal: max 250 V 1 A N.O./N.C.
-5 ÷ +55 °C
90% max
IP-44
Mineral Oils
32 ÷ 220 cSt
-20 ÷ +65 °C
2